Today is 2021-07-24 Saturday,Welcome to this site 

Recommended products

Indoor matting agents


Word:[Big][Middle][Small] QR Code 2016/12/30     Viewed:    

A. Product introduction

KT100S is a model for mixed powder coating matting additive, which is mainly characterized in that: the ratio of reactive or non reactive matting agent has better anti yellowing and leveling, and impact on the film is minor, the minimum can be 20 degrees below the extinction effect gloss (60 degrees of incident angle).

Two. technical parameter

Appearance light yellow to white powder

Melting range >140

Volatile <1.5%

Three. Application and technical characteristics

1 non wax based additives, suitable for the 5050 and 6040 hybrid system can be applied to the black system.

2 excellent resistance to bake yellow deformation.

3 delicate surface leveling is good, no problem.

4 add amount of 0.5% to 1.5%, depending on the desired gloss.

5 baking temperature and curing time and polyester properties.

6 the additive does not affect the re coating.

Four. Storage and precautions

Store in a cool, dry place. The product is valid for at least two years at normal room temperature.

Five. Packing

Polyethylene liner, kraft paper packing, net weight 25 kg.

Go Back